Step 1. After Buying DSF Clear Postive Laser Films for Screen Printing

Load your film into your printer as you normally would. We suggest using a Xerox Phaser 5550 printer, however any laser printer will work with the film. (Note: Laser Films will not work with inkjet printers.) If you wish to control the density of your output, you may do so by controlling the toner settings. There are no specific settings for laser Printing. Make sure your artwork settings are set at 100% black and then hit print.

When you have your film & silk screen then you are ready to expose it. Depending on your experience with exposure, you may need to expose your artwork more than once. If needed, you can expose it for the first time, rinse it, then expose it a second time without the film attached to help harden the emulsion. We recommend adjusting the exposure strength lower, because laser films are not as dense as inkjet outputs. You may need to try a few times to get the right setting.

You are ready to print after touching up your screen. You can print on any promotional item you wish such as t-shirts, notebooks, coffee mugs, pens & more.

1. Why buy Laser Film instead of Inkjet?
Laser Film is cheaper & quicker to output, thus saving time & money. The density of the output on laser is also normally not as opaque as ink jet.

2. Will any laser printer work?
Yes, most laser printers will work. We suggest using Epson, Xerox, or Canon for the best quality results.

3. When will my order ship?
After your order is processed, it usually ships within 24-48 hours, with the exception of Saturday and Sunday (we do not ship on weekends).

4. How is your quality?
The quality of our products is great, with a 99.5% customer satisfaction rate to prove it. You will receive the same results comparable to high-end brands, at a fraction of the cost.

5. Is your Film Coated?
No, our film is not coated.

6. Is it transperant?
Yes, the film is clear.

7. What is the exposure time?
Depending on the artwork, film, machinery, and exposure settings, the exposure time varies with each print.

8. Can I receive a sample to test?
Yes, we do offer samples of our products for testing.

9. Do I need to RIP software to run laser?
No, there is no need for RIP software to output on our laser film.

10. What is your return policy?
Our policy states that if you are not satisfied with our products, you have up to 90 days to return your order.